It should be set between 37 and 40º F (3-4ºC) for the refrigerator and between 0-5ºF (-15 to -18ºC) for the freezer.
You may have to consult your owner’s manual for the locations of the components. If a part does not have continuity, it is faulty and will need to be replaced.
It should be set between 37 and 40º F (3-4ºC) for the refrigerator and between 0-5ºF (-15 to -18ºC) for the freezer.
Repeat the process all around the seals of the appliance. If there’s no tension at any spot, the seals are starting to fail. You should also check for cracks and rigidity that could be causing a failing door seal.
The refrigerator should be turned off before attempting to clean the drain pan and tube.
