Even if you don’t have an accidental damage plan, you might be able to pay an authorized service provider to do the repair for you. Unlike doing the repair yourself, this would usually protect your warranty as long as the technician is authorized.
You’ll want to purchase the entire replacement screen assembly (which includes the laptop cover) rather than just the screen itself. This requires you to disassemble your MacBook, which involves special tools. Due to security features built in to your Mac, you’ll need to buy an official Apple digital assembly, as aftermarket assemblies won’t work with modern processors. [1] X Research source
Because you’ll usually have to do several extra steps that are specific to the model when replacing a touch screen with a separate digitizer, you’ll want to search the web for your particular model and “touch screen replacement” to find instructions that pertain to your computer. [2] X Research source
PC: Press Windows key + R, type msinfo32, and then press Enter. You’ll find the model next to “System Model” (i. e. , “Inspiron 16 7610”). Mac: Click the Apple menu, select About This Mac, and then locate the model number below the operating system version (i. e. , “MacBook Pro 15-inch 2017”). [3] X Research source
Right-click the desktop and choose Display Settings. Under “Scale & layout,” find the “Display resolution” drop-down menu. The value next to “Recommended” is the resolution you’ll want to look for.
When you order a screen replacement, check the website for the tools you’ll need for your specific model. You can often purchase all of the necessary tools together as a kit. In general, you’ll want to have one or two magnetic Philips head electronics screwdrivers (size 0 and 00), a Torx T5 screwdriver, a pair of tweezers, a thin metal blade, and a plastic spudger.
If you need to replace the screen of your MacBook Pro, Air, or regular MacBook, the best way to find out which tools and parts you’ll need is to go to https://ifixit. com and search for a repair guide for your specific model.
Many modern laptop batteries are screwed in. You’ll usually need to unscrew the bottom panel to reach the battery, which you’ll then need to unscrew. Keep the battery in a safe spot, as you will need to put it back in later.
Some bezels don’t have any screws on them—they might even be held in with double-sided tape. [4] X Research source If there are rubber screw covers over the screws, remove them first using the end of a screwdriver. Place the screws in a plastic bag or bowl with the rubber covers so all the components are together in a safe place.
If the bezel does not pop or slide off with a bit of pulling, you may have missed a bezel screw. Check the screen to confirm you removed all the bezel screws so the bezel can slide off.
Be careful of any broken glass or plastic on the screen as you remove it.
Some laptops might have two separate cables connected to the LCD. [5] X Research source Try to keep the tap intact so you can use it to secure the connector(s) to the back of the new LCD.
Open Terminal on your Mac. Type sudo nvram AutoBoot=%00 and press Return. Enter your password to confirm.
Open Terminal on your Mac. Type sudo nvram AutoBoot=%00 and press Return. Enter your password to confirm.
Because the screws are a variety of sizes, it might be helpful to store each size screw in an empty ice cube tray so you don’t mix them up.
The latch is different per model—sometimes you’ll need to actually lift a metal locking arm to pull the battery out of the socket, and on other Macs, you’ll need to use the spudger to slide the connector parallel to the logic board to remove the plug from the socket. If you have a MacBook Pro, you will also need to unscrew the round pancake screw that secures the battery connector in place. [10] X Research source You can do this with a T5 Torx screwdriver. Once you remove the screw, use a spudger to lift up the metal connector to ensure that there is no contact with the metal underneath. [11] X Research source
If you disabled AutoBoot, you’ll want to re-enable it. To do so, return to the Terminal, type sudo nvram AutoBoot=%03, and press Return.
